ECU Decoder For Renault With Engine Immobilizer System
There is no problem if replacement ECU is bought from Renault
service dealer - it is sold with no immobilizer code stored, but
replacing damaged computer with used one is impossible because of
mismatch of unlocking codes.
Decoding tool has several modes of operation and deals with all
known petrol and diesel injection systems, introduced in range of
year 1994-2001 without intervention in to the ECU (diesel coded
anti-start valve as well). After decoding process is completed,
control unit became de coded - as it was bought from dealer. ECU
must be taken out from the car and connected to the decoding tool
according to user manual.
Tested System for Renault ECU Decoder:
Bosch Motronic MP7.0
Magneti Marelli IAW 06R
Bosch MSA 15.5(DTI)
Code Fuel Cut-off valve(1.9D DDS)
Decoding of engine control units manufactured in range of year
1994-1996 is semi-automatic, from year 1996 - fully automated.
Especially this tool can be useful when rubber-filled FENIX5,
SAFIR2 or coded diesel anti-start valve must be decoded. This tool
will decode all listed type 1 and 2 immobilizer systems..
Buying this tool you will be supplied with all required
information: user manual and connection diagrams. Decoding tool is
stand-alone, no PC is required.
The following ECU’s will need a valid immo code:
Some of FENIX5 for LAGUNA/SAFRANE 2.0l 16V
All of SIRIUS32 except for KANGOO 1.4l 16V - You can attach the
immo emulator on this ECU after decoding
LUCAS DCU3R, Bosch MSA15.5 and EDC15C3
This means that after the decoding procedure on one of these ECU is
done, you must have the immobilizer system fully operational
(matching key) to start the engine.Otherwise after decoding the
above ECU’s you can use a Renault emulator